OcNOS CLI Lab

A simulation of the OcNOS command line in your browser, on ready-made networks with guided exercises. There is nothing to install.

Skip past the lab
OcNOS CLI Lab

Start the OcNOS CLI Lab

Pick a network, then type OcNOS commands or follow a guided exercise.

You fill in a short form once. Our team may follow up by email.

A working model of the OcNOS 7.0 command line, built from real hardware output. The routers are simulated, so it is made for learning and checking the CLI rather than for authoring configuration you will deploy.

In the lab, Tab completes commands. Press Esc to leave the lab and move to the exercises.

OcNOS CLI Lab: common questions

Is the OcNOS CLI Lab real OcNOS?
No. It is a simulation of the OcNOS command line, built from output recorded on real OcNOS 7.0 hardware. The routers are simulated, so the lab is for learning and checking the CLI, not for writing configuration you will deploy.
Do I need to install anything?
No. The lab runs in your web browser. You fill in a short form once, and the lab opens on this page.
What can I practise in the lab?
Practise OcNOS show commands and configuration on ready-made service provider networks and a leaf-spine fabric. Follow guided exercises on segment routing, TI-LFA, SR-TE, EVPN, VPLS, RSVP-TE and RPKI, or find and correct a fault in a fix-it challenge.
How is the lab different from the free OcNOS VM?
The lab simulates the command line in your browser. The free OcNOS-SP VM is OcNOS software that you run in your own hypervisor or lab tool. The VM includes a 365-day license and the CLIs for Layer 2, Layer 3, MPLS and multicast features. Data plane forwarding is limited, so use it to learn OcNOS and test configurations, not to measure performance or run full-bandwidth traffic.
Is the lab free?
Yes, the lab is free to use. You fill in a short form once to open it.

Ready to run OcNOS itself?

Download the free OcNOS-SP VM for your own lab, or talk to our team about your network.